ENGLISH WARNING n Before starting the machine, check that all screws, To reduce the risk of injury, the user nuts, bolts, and other fasteners are properly secured must read and understand the operator ’s and that guards and screens are in place. Replace manual before using this product.
ENGLISH supply, make sure that all moving parts have come to a complete stop. Allow the machine to cool before making any inspections, adjustments, etc. ELECTRICAL SAFETY AND PLUG FITTING WARNING Read these safety instructions thoroughly before connecting this product to the mains supply. n Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate.
ENGLISH WARNING SYMBOLS The following warning symbols/pictograms are found on the appliance. SYMBOL EXPLANATION WARNING! Read operator’s manual WARNING! Switch the tool OFF and disconnect from the mains supply before making adjustments, cleaning blockages, or starting any cleaning and maintenance procedures. WARNING! Keep bystanders away WARNING!
ENGLISH WARNING WARNING! Take care when tilting the unit onto its wheels as The cutting device has a tendency to pull the unit has an uneven weight distribution when branches/stems into the machine. Do not try tilted and during wheeled transportation. to impede entry of materials once feeding has started.
ENGLISH 6. Close the cover, making sure it is correctly fitted and blades. (See figure 12) securely re-tighten locking knob. 6. Ensure all hex screws are fully tightened. NOTE: If cover is not correctly fitted and locking knob not 7. Replace shredder cover, making sure it is correctly securely tightened, the shredder will not operate.
Page 8
ENGLISH the warranty, the original bill of purchase (with purchase date) must be submitted. The warranty will not apply in cases of: n Normal wear and tear. n Incorrect use, e.g. overloading of the appliance, use of non-approved accessories. n Use of force, damage caused by external influences n Damage caused by non-observance of the user manual, e.g.
MAINTENANCE section on page 6. The cutting blades are worn or Purchase replacement blades. Please damaged on both sides. contact your local Ryobi stockist. Caution! Allow the shredder to come to a complete stop before changing the direction of rotation.
Page 10
Subject to the guarantee condition below, this Ryobi guarantee does not cover damage, malfunction or tool (hereinafter called “the product”) is guaranteed by failure resulting from misuse, neglect, abuse, or used TECHTRONIC INDUSTRIES AUSTRALIA for a purpose for which it was not designed or is not LIMITED (hereinafter called “the Company”) to be free...