• Cord replacement should only be carried out by an authorised person or by a Ryobi authorised service centre. • Do not operate the machine on a paved or gravel surface where ejected material could cause injury.
DESCRIPTION 3. Allow the cutting blades to reach full speed before feeding the material into the in-feed chute. 1. Feed hopper 4. Use the machine to shred the following materials only: 2. Motor cover 1). Twigs and branches (Max. diameter 40mm) 3.
OPERATION MAINTANENCE STARTING THE SHREDDER WARNING! Warning: During maintenance and cleaning ensure the machine 1. Press the switch marked “I” to start the motor. (Fig. 5) is disconnected from the mains. 2. Press the “circuit breaker” button if the machine does not 1.