Comm Manager; Connection Setup - HTC Touch Touch Dual User Manual

10 Getting Connected

10.1 Comm Manager

Comm Manager acts like a central switch that lets you enable or disable
phone features as well as manage your data connections easily.
To open Comm Manager
Tap Start > Programs > Comm Manager.
1
2
3
4
5
1 Tap to switch Airplane mode on or off. Turning on Airplane mode turns off the
phone and Bluetooth functions. For more information, see "Airplane Mode" in
Chapter .
2 Tap to switch the phone on or off. Tap Settings > Phone to set the ring tone and
other phone settings. See Chapter  for details.
3 Tap to switch Bluetooth on or off. Tap Settings > Bluetooth to configure
Bluetooth on your device. See "Bluetooth" in this chapter for details.
4 Tap to switch between automatically receiving (as items arrive) or manually
retrieving Outlook e-mails. See Chapter  for details.
5 Tap to disconnect active data connections (e.g. G). You cannot reconnect a data
connection in Comm Manager.
Off/Disabled
On/Enabled

10.2 Connection Setup

Connection Setup configures your device's data connections, such as
GPRS, WAP, and MMS, for you so that you do not need to enter the settings
manually onto your device. All you need to do is to select your network
operator, then Connection Setup does all the configuration for you.
To automatically detect the network operator
The first time you power on your device, or when you insert a new SIM card
and then power on your device, Connection Setup will display a notification
message to inform you that it will automatically configure your device.
1. Tap Yes on the notification message.
Note
If your SIM card supports multiple network operator profiles, the next
message that appears will display network profile choices. Select the
profile you want to use and tap OK.
2.
Next, you will be asked if you want to automatically configure your
device to the proper network settings. Tap Yes.
Connection Setup then configures your device's data connection
settings.
3. After the Connection Setup completes the configuration, tap Restart.
To manually select the network operator
You can also manually select your network operator from Connection
Setup's settings screen. Connection Setup will then reconfigure your
device's data connections settings based on the operator that you selected.
1. Tap Start > Settings > Connections tab> Connection Setup.
2. Select the network Country and Operator you want to use.
Getting Connected 11