Philips HP6583 Manual page 9

1x
2x
2
1
2 Press the on/off button once to switch on the appliance.
The appliance starts to operate at speed II, which is the most
,
efficient speed for epilating.
Note: If you want to use speed I, press the on/off button a second time.
Note: Speed I is suitable for areas with little hair growth and for hard-to-reach
areas, such as knees and ankles.
3 If you are not using the skin stretcher, stretch the skin with your free
hand to make the hairs stand upright (1). Place the epilating head at
an angle of 90° onto the skin with the on/off button pointing in the
direction in which you are going to move the appliance (2).
Note: If you are using the skin stretcher you do not need to stretch your skin
anymore. The skin stretcher also ensures that you keep the appliance on your
skin at the right angle. Make sure that the skin stretcher is in contact with your
skin as shown in the figure.
4 Slowly move the appliance over the skin against the direction of the
hair growth while pressing it lightly.
Tip: To relax the skin, we advise you to apply a moisturising cream immediately
or a few hours after epilation. For the underarms, use a mild deodorant without
alcohol.
ENGLISH
9