Philips HP6583 Manual page 17

2
1
6 Shake excess water off the parts and let them dry.
Note: For hygienic reasons, make sure all parts are dry before you reassemble
the appliance.
7 To reattach the epilating head, place it on the appliance and press it
onto the appliance until it snaps home.
Cleaning the shaving head and the comb
1 Remove the comb, if attached, by pulling it off the shaving head.
2 Press the release button (1) and remove the shaving head from
the appliance (2).
3 Remove the shaving unit from the shaving head.
4 Rinse the shaving unit, the shaving head and the comb under
a lukewarm tap while turning them.
5 Shake the shaving unit, the shaving head and the comb firmly and let
them dry.
Note: Do not exert any pressure on the shaving unit to avoid damage.
6 Reattach the shaving unit to the shaving head.
Note: Make sure all parts are dry before you place them back on the
appliance.
ENGLISH
17