HP xw4400 Service And Technical Reference Manual page 42

Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
Heading Option
Onboard
Devices
PCI Devices
Bus Options
Device Options
Slot 1 (PCI
Express x 16)
Slot 2 (PCI)
Slot 3 (PCI
Express x
8' (x4))
Slot 4 (PCI
Express x1)
Slot 5 PCI
32 Chapter 3 System management
Description
Enables you to set resources for or disable onboard system devices (serial ports, USB ports,
diskette controllers, and so on).
Enables you to set resources for the following devices:
Intel HD Audio Device (IRQ 5, 10, 11, or disable)
Intel USB Controller (IRQ 5, 10, 11, or disable)
Intel USB Controller (IRQ 5, 10, 11, or disable)
Intel USB Controller (IRQ 5, 10, 11, or disable)
Intel USB Controller (IRQ 5, 10, 11, or disable)
Intel USB Controller (IRQ 5, 10, 11, or disable)
Intel IDE Controller (enable/disable)
Intel SATA Controller (IRQ 5, 10, 11, or disable)
VGA Controller (IRQ 5, 10, 11, or disable)
Broadcom Ethernet Controller (IRQ 5, 10, 11, or disable)
The options are:
PCI SERR# Generation (enable/disable)
PCI VGA Palette Snooping (enable/disable)
ECC Support (enable/disable)
Memory Remapping (enable/disable)
Printer Mode (EPP + ECP, Output-Only, Bi-Directional)
Num Lock State at Power-On (off/on)
S5 Wake-on-LAN (enable/disable)
Processor Cache (enable/disable)
Unique Sleep State Blink Rates (enable/disable)
Internal Speaker (enable/disable)
Monitor Tracking (enable/disable)
NIC PxE Option ROM Download (enable/disable)
Configures the option ROM.
Configures the option ROM and latency timer.
Configures the option ROM.
Configures the option ROM.
Configures the option ROM and latency timer.
ENWW