Placing A Call - Cisco 7940 Series User Manual

Chapter 3 Placing a Call and Other Basic Phone Tasks
Table 3-1 Placing calls on your Cisco IP Phone (continued)
If you want to...
redial the most recently dialed
number
use speed dial numbers
use a directory
dial a Personal Address Book
entry
dial a Personal Fast Dial number Refer to the
Tip
78-10182-08
Then...
Press the Redial softkey.
Press a Speed dial button to place a call to the corresponding
number.
See the "Using Speed Dial" section on page 3-12
Select a number from one of the directories, then press the Dial
softkey.
See the "Viewing and Dialing from the Phone Logs" section on
page 3-21
Refer to the
page 5-9.
page 5-20.
If you receive a busy tone or a ring with no answer when you call another
extension, you can use the Cisco Call Back feature to get an alert when the
extension is available. See the
Available Using Cisco Call Back" section on page
Related Topics
• A Road Map to Your Cisco IP Phone, page 1-6
Answering a Call, page 3-4
•
• Ending a Call, page 3-4
• How to Get Notified When a Busy Line is Available Using Cisco Call Back,
page 3-8
• Redialing the Last Number Dialed, page 3-8
Using Speed Dial, page 3-12
•
Making Conference Calls, page 3-17
•
for details.
"Dialing a Personal Address Book Entry" section on
"Dialing a Personal Fast Dials Entry" section on
"How to Get Notified When a Busy Line is
Cisco IP Phone 7960 and 7940 Series User Guide
Making Telephone Calls
for details.
3-8.
3-3