HP xw3400 User Manual page 92

Section ìScreenî
Identifier ìscreen_Dî
Device ìcard_3î
Monitor ìHP Monitorî
Ö
EndSection
Ö
Section ìServerLayoutî
Identifier ìXinerama Desktopî
Ö
Screen 0
Screen 1
Screen 2
Screen 3
Ö
EndSection
Section ìServerFlagsî
Option ìXineramaî ìtrueî
EndSection
Example C: Four Monitor Workstation [4 x 3D graphics – xw9300 only]
On an HP xw9300 Workstation running Linux, two graphics cards are installed:
• PCIe slot 0 = NVIDIA FX1400 with two DVI-I connectors [A,B]
• PCId slot 1 = NVIDIA FX1400 with two DVI-I connectors [C,D]
The user desires to configure one continuous desktop. All screens merge to form a single continuous
display.
Note: Two NVIDIA TwinView Screens with 2 3D-capable graphics cards can only be done on the
xw9300 because it alone offers dual PCIe x16-capable slots.
Assuming four matched monitors of the exact same type, the following configuration highlights apply
[Note: "..." means omitted details]:
Ö
Section "Device"
"NV PCIe-1"
Identifier
"nvidia"
VendorName
"nvidia"
Driver
"PCI:10:0:0"
BusID
"IgnoreEDID"
Option
"UseInt10Module"
Option
# sample TwinView setup
"TwinView"
Option
"TwinViewOrientation"
Option
"MetaModes"
Option
EndSection
Section "Device"
"NV PCIe-2"
Identifier
ìscreen_Aî
ìscreen_Bî RightOf ìscreen_Aî
ìscreen_Cî RightOf ìscreen_Bî
ìscreen_Dî RightOf ìscreen_Cî
Figure 9. Four Monitor Xinerama setup
"RightOf"
"1280x1024,1280x1024"
# display D
# Screen A
# Screen B
# Screen C
# Screen D
# enable Xinerama
14