Confirmation For Nfc Tag Communication - Toshiba SMMS-u MMY-MUP0801HT8 Quick Reference

For example; How to prohibit Test operation from WTA (If you need)
Steps
1 Change rotary switch position for Outdoor DN code setting
2 Push SW04 for activate DN code
3 Change DN code Number to "dn.005" with SW05 or SW06
Change data value display with SW04
4 *"d. 0" shows validness of TEST operation by NFC App
in case of the outdoor unit Power ON within 48h.
Change value to "d.
5
*"d. 1" shows prohibition of TEST operation by NFC App,.
Push SW04 more than 2sec.
6
7-seg display will change from flashing to lighting.
7 Return to default Rotary switch position.
8 Turn ON/OFF ourdoor unit main power supplies. Keep turn off time 60 seconds or more.
* Do it again if the 7-segment display is different from the above.
* The functions other than the test operation of this Application can work normally even if the test operation
function are prohibited.

16-4. Confirmation for NFC tag Communication

When you cannot read out the information of the NFC tag with your smartphone, preform the following step.
Rotary switch
Step
SW01 SW02 SW03
1 2 16
2 1 1
If above check is no problem, refer to User Guide of Wave Tool Advance.
Trademark
QR code is a trademark or registered trademark of DENSO WAVE INCORPORATED.
Android is a trademark or registered of Google LLC.
Items
1" with SW05 or SW06
Push switch
SW04 SW05 SW06
14 — — —
1
Rotary switch
SW01 SW02 SW03
9 1
9 1
9 1
9 1
9 1
9 1
1 1
7-segment
Check result
display
nFc. Normal
NFC tag wiring trouble
nFc.Er
Check NFC tag wiring
U ∗ ---
(Return to Rotary switch)
– 107 –
Push SW
SW04 SW05 SW06
1 — —
1 Push —
1 — Push Push
1 Push —
1 — Push Push
Push
1 more than —
2 sec
1 — —
7-segment
display
— dn.SEt
— dn.001
dn.005
— d. 0
d. 0
Flashing>
— d. 1
Lighting
— U * ---