Environmental Protection - IVT TC-900 Instruction Manual

Manual instruction
always be realized by the producer of the tool or
service maintenance.
• Check the alignment of moving parts, check if
they are securely fixed and in proper working order.
• If the unit is not used, before any maintenance,
cleaning or replacement of accessories, it is essential
that you disconnect the power supply.
• Be careful that the unit is turned off when you
plug in the socket.
• Store the unit not used in a dry place and out of
reach of children.
EN
Use only replacement parts and accessories
supplied or recommended by manufacturer. Never
attempt to repair the unit it yourself. Indeed, all the
work that are not stipulated in this manual must be
entrusted exclusively to service workshops after-
sales authorized by us.
Changing blade
To replace the blade (2), proceed as follows:
• Remove the plug from the socket.
• Remove the water tank (3) from underneath the
machine.
• Remove the lower guard (4) by loosening the
screws on each side of the guard.
• Loosen and remove the mounting nut and slide
the outer flange.
• Remove the blade (2) and put on a new blade
on the inner flange. Fix and secure the outer flange.
• Reposition the lower guard (4) and secure it with
its screws.
ATTENTION! Clean the machine only
when it is unplugged.
Cleaning
• To clean the device use a soft humid cloth and a
little of mild soap.
• Never wet the tile cutter and do not use
detergent, alcohol, gasoline, etc..
• For a thorough cleaning, contact an authorized
Service.

Environmental protection

Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
14