HP rx5670 Hardware Installation Manual page 33

Installing a PCI Card
The server may contain up to 12 PCI Cards. PCI Cards are located in the Side Service Bay.
WARNING Ensure that the system is powered-down and all power sources have been
disconnected from the server prior to installing a PCI Card.
Voltages are present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in
the off position.
Failure to observe this warning could result in personal injury or damage to
equipment.
CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the server.
To install a PCI Card, perform the following steps:
1. Remove the appropriate PCI Slot Cover from the rear of the chassis.
Chapter 2
Installing Additional Components
Installing PCI Cards
33