HP rx5670 Hardware Installation Manual page 26

Installing Additional Components
Installing Processors and Memory
2. Pull up on the extraction levers to free the Processor Extender Board from the socket located on the
System Baseboard.
Figure 2-6 Processor Extender Board
Installing the Processor
To install a Processor, perform the following steps:
1. Ensure that the cam on the Processor socket (Figure 2-7, item 1) is in the unlocked, counterclockwise
position.
2. Carefully lower the Processor, without the Retention Cover, into the Processor socket using the guide pins
(Figure 2-7, item 2) to align the assembly.
3. Rotate the cam on the socket (Figure 2-7, item 3) 180 degrees clockwise using a 2.5mm hex driver.
26
Chapter 2