Table of Contents
Advertisement
2-3. Mechanism Parts
2-3-1. Mechanism Chassis Assembly
Note:
• When removing the mechanism chassis assembly (3),
be sure to short-circuit the laser diode output land
before removing the connector and the flexible cables.
After replacing, open the land as it was after inserting
the connector and flexible cables.
1. Remove the tray. (Refer to items 2-1-3 and 2-1-4.)
2. Remove three flexible cables (1).
3. Remove four screws (2), then remove the mechanism
chassis assembly (3).
Screws (2)
Mechanism
chassis assembly (3)
Flexible
cables (1)
Fig. 2-1-26
Pickup head
Laser diode
output lands
Pickup A
Pickup head
Laser diode
output lands
Pickup B
Advertisement
Table of Contents
