Toshiba SD-520ESE Service Manual page 45

Output sound conversion table
Output
Input
Dolby Digital
Linear PCM
DVD
video disc
DTS
MPEG1, MPEG2
DVD audio disc (LPCM, PPCM)
VIDEO CD
Linear PCM 44.1 kHz/16 bit
Audio CD
DTS
MP3
• When "Multi" is selected 61
table, regardless of "Digital Output" setting
• Some of multi-channel recorded DVD audio discs may not be permitted 2-channel mix playback. If you play such a disc on
this player connecting two speakers, you may obtain only the original left and right channel sound, and may not hear other
channels. This is because of the playback restriction of the disc. Refer to instructions of the disc for details. Such discs may
include the same contents recorded in stereo. Play it if available, by changing the audio setting.
• Signals of 88.2 kHz or higher from the BITSTREAM/PCM jack are depressed to 44.1 kHz or 48 kHz by down sampling
process when:
– "3D" is selected.
39
– "PCM Down Sampling" is set to "On."
– a copyright protected disc is played.
– " Pro Logic" is set to "On."
• Quantization bit of signals of 20 bit or higher which is output from the BITSTREAM/PCM jack is 16 bit if they are in a
copyright protected disc.
Multi channel sounds
BITSTREAM/PCM
5.1CH AUDIO ANALOG OUT Jacks
jack
"Digital Output"
56 62
Stereo Bitstream
Multi Bitstream
PCM
Bitstream
Bitstream
Bitstream
Stereo
Multi
Bitstream
PCM
PCM
No decode Bitstream
PCM
, the format of output signals from the BITSTREAM/PCM jack is fixed as shown in the above
.
62
60
61
56 61
" Pro Logic"
"On" "Off"
Pro Logic
Pro Logic
Pro Logic
Pro Logic
Pro Logic
Noise Noise
2 channel stereo sounds
BITSTREAM/PCM jack
ANALOG OUT
56 62
"Digital Output"
"Bitstream" "PCM"
Bitstream PCM
Bitstream
PCM
PCM PCM
Bitstream Bitstream
Bitstream PCM
Bitstream PCM
PCM PCM
PCM PCM
PCM PCM
Bitstream Bitstream
PCM PCM
: 3D sound enhancement can function.
2CH AUDIO
Jacks
Noise
43