Table of Contents
Advertisement
2-2-2. Output PC Board
1. Remove the top cover. (Refer to item 2-1-1.)
2. Peel off three tapes (1) and remove the connector (2).
3. Remove three flexible cables (3).
4. Remove one screw (4), then remove the lug lead wire
(5).
5. Remove seven screws (6), then remove the output PC
board (7).
Connector (2)
Twist more than 9 times.
Fig. 2-1-22
Flexible
cable (3)
Tapes (1)
Screws (6)
Flexible
cables (3)
Screw (4)
Lug lead
Output
wire (5)
PC board (7)
Screws (6)
2-2-3. Power PC board
1. Peel off three tapes (1) and remove three connectors
(2).
2. Remove four screws (3), then remove the power
supply PC board (4).
Connector (2)
Screws (3)
Screws (3)
Twist more than 9 times.
Fig. 2-1-23
Power supply
PC board (4)
Tapes (1)
Connector (2)
Advertisement
Table of Contents
