Removing The Left And/Or Right Panels - HP Visualize J5000 Owner's Manual

Changing Your Computer's Hardware Configuration
Opening the System Unit
Figure 2-4 Removing the Top and Side Panels
3
1
2
3

Removing the Left and/or Right Panels

In order to remove the left and/or right panels, you must first remove the
top panel, as described above. Then, the left and right panels are free to
tip out and away from the unit. The side panels stay in place after the
top panel is removed because of three locations on the friction-fit tab
running along the top edge of the side panels. After the desired side
panel has been tipped out and away from the chassis, as shown in the
illustration above, it can be lifted straight up.
The left panel (which on the right in the illustration above, since you are
looking at the back of the machine) must be removed to install or remove
memory (DIMMs), and the right panel (which on the left in the
illustration above, since you are looking at the back of the machine) must
be removed to install or remove I/O cards.
Chapter 2 45