HP Visualize J5000 Owner's Manual page 141

Main Menu: Enter command > search
Searching for potential boot device(s)...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path Number
-----------
P0
P1
P2
Search terminated.
• If you wish to interact with the Initial System Loader (ISL) before
Chapter 8
A message similar to the following will be displayed:
Device Path
-----------------
LAN.15.11.162.224.3.254
LAN.15.11.160.173.3.254
LAN.15.11.160.154.3.254
At the prompt, you might type the following and press Enter:
Main Menu: Enter command > boot P1
Note that the operating system on the specified device (P1) is used to
boot your computer (also see the section "Searching for Bootable
Media").
booting you computer, follow the directions in "Accessing the Boot
Console Interface" earlier in this chapter, and then type the following
at the prompt:
Main Menu: Enter command > boot device
The following prompt will appear:
Interact with ISL (Y,N,Q)>
Answering yes (Y) causes the ISL to be loaded from the specified
device. After a short time, the following prompt appears on your
screen:
ISL>
ISL is the program that actually controls the loading of the operating
system. By interacting with ISL, you can choose to load an alternate
version of the HP-UX operating system. To interact with the ISL, you
must enter no (N).
For example, if the usual kernel (/stand/vmunix) on your root disk
(fwscsi.6.0) has become corrupted, and you wish to boot your
The Boot Console Interface
Booting your Computer
Device Type
-----------
15.11.162.224 100/Half Dx
15.11.160.173 100/Half Dx
15.11.160.154 100/Half Dx
141