HP Visualize c160 Install Manual page 20

RavenC160-180.FB 18 Wed Jul 10 14:00:20 1996
Replacing the Main Tray Assembly
6 Reconnect the power cables and any other cables, or terminators that you discon-
nected when opening the workstation.
7 Power on the monitor, any peripheral devices, and the system unit.
After you install the new CPU board or I/O board and power on the system for
the first time, you are prompted for the LAN ID. Enter the LAN ID you recorded
in the beginning of this document.
In case of problems, refer to chapter 5 of the Owner's Guide.
8 Pack the old CPU board in the packaging from the upgrade kit and use the docu-
mentation provided with the upgrade kit to return it to Hewlett-Packard.
18