Installing An Accessory Board - HP Vectra XM5 3 Supplementary Manual

Installing an Accessory Board

The HP Vectra XM 5/xx series 3 PC has four slots that can be used for installing accessory
boards:
the top slot can be used for a half-length PCI accessory board
the second slot can be used for either a full-length PCI or ISA board
the third slot can be used for a full-length 8- or 16-bit ISA board
the fourth (bottom) slot can be used for a half-length 8- or 16-bit ISA board.
Accessory boards may have preferred locations and special installation instructions - refer to
the manual supplied with the board.
HP Vectra XM 5/xx Series PC Familiarization Guide
44
2 PC Hardware Structure