Table of Contents
Advertisement
Start from Hard
Disk
Flexible Disk Drives
Hard Disk Drives
Writing on Flexible
Disks
Plug and Play
Device Management
Parallel Port
Parallel Port Mode
Serial Port A
Serial Port B
Remote Start
Network Protocol
PCL Integrated
Ethernet Interface
MAC Address
HP Vectra XM 5/xx Series PC Familiarization Guide
Repair
52
Select the level of
support for Plug and
Play Accessories (see
section in Chapter 2)
Enable or Disable the
remote start feature
Select which protocol
will be used for
Remote Start
Enable or disable the
integrated Ethernet
interface
View the MAC
address (if the
Ethernet interface is
enabled)
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
None/Boot
Only/Full
Select as
Disable the
combination of I/O
parallel port to
address and IRQ
resolve an
channel.
address conflict,
prevent access to
your system, or
free an IRQ or I/O
resource.
Centronics, ECP,
EPP 1.7 or EPP
1.9
Select a
Disable a serial
combination of I/O
port to resolve an
address and IRQ
address conflict,
channel.
prevent access to
your system, or
free an IRQ or I/O
resource.
None/Ethernet
None/Novell/Micro
soft
Enabled/Disabled
3 Troubleshooting and
Advertisement
Table of Contents
