Hardware Reference Manual
GFK-3014E
Figure 5-21
Note:
You can lock each SSD tray using the provided key.
5.2
Additional Devices
5.2.1
Temperature Sensor
There are two thermal zones on the CEC09 Carrier board that can be observed with an EMC2113
device. This device contains internal temperature sensors and can connect three external
temperature sensors. All external sensors are grouped as one thermal group and placed so that
the hottest point can be observed no matter the mounting style.
The EMC2113 device measures the temperature of several higher rated devices (I210IT/IS; RS–
232 Transceiver; 4x
PCIe2UART) with the help of a common heatsink.
A dual THRM LED located on the front panel indicates the current thermal.
Table 5-10
LED Color
Green
Yellow
Red
5.2.2
NVSRAM
The RXi2-EP IPC is capable of Non-Volatile Random Access Memory (NVSRAM) as a mPCIe board
add-in option that is automatically backed up when the RXi2-EP IPC is switched off or loses
Hardware Interface
Insert the tray
THRM LED Indication
LED Status Indication
Everything OK
T
reached (wired to U3080/SMBus Port Expander via pin 0)
Hot
T
reached (wired to U3080/SMBus Port Expander via pin 1)
Crit
Hardware Interface
September 2021
46