HP Vectra VE6 8 Installation Manual page 7

2 Connecting to a Netware 4.11 Server
Windows for Requirements
Workgroups
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.
• Driver Name: IBMTRPO.LAN Size: 65KB Date: 7/26/96
• Novell Netware server 4.1 that supports Net BEUI, NWLink IPX/SPX, and
Device Configuration
Card State
I/O Address
Procedure
1 Boot the Vectra to a DOS prompt, and insert the IBM Token-Ring 16/4 PCI
2 From the "IBMWOL\IBMTRPCI\LANAID\" directory on your CD-ROM run
3 Hit enter for "Software Installation" and verify the following options:
4 DOS with Windows v3.1x
5 Express Install LAN Client's NetWare Client & 802.2
6 Hit enter to continue, and at the "Express Install of IBM LAN Client"
7 After file copy is complete, remove any diskettes, hit enter four times to
8 After Windows loads, open the "Netware User Applications" window, and
9 Login into the current server to verify connection.
NWLink NetBIOS transfer protocols.
Vectra VL8
-
Interrupt 11
C800-h
adapter and drivers CD ver 1.
"LANAID.EXE."
window, hit enter to install.
exit, then reboot the computer.
double-click the "NetWare User Login" icon.
2 Connecting to a Netware 4.11 Server
Vectra VE7/VE8
Enabled
10(11)
DC00-h
Windows for Workgroups