HP Vectra VE6 8 Installation Manual page 13

Hp vectra ve6 8: installation guide

Hide thumbs Also See for Vectra VE6 8:

Windows 95 SR2

Requirements

• HP Vectra with Windows 95SR2 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2

• Driver Name for Vectra VL8: W95SETUP.INF Size: 8K Date: 10/18/96

• Driver Name for Vectra VE7/VE8: OEMSETUP.INF Size:65K Date: 08/05/

• Microsoft Windows NT Server 3.51 server that supports Net BEUI,

Device Configuration

Procedure

1 With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card

2 Boot the machine to Windows 95, and the Token-Ring card will

3 When prompted, click on "Other Locations."

4 Insert drivers CD, set the path to "D:\WIN95\" (Where "D" is the drive

5 Click on "OK" to continue the installation.

6 Verify that "IBM PCI Token-Ring Adapter, NDIS2/3" is listed and click on

7 Click "OK" to provide your Computer and Workgroup names.

8 Enter your Computer Name, Workgroup Name, Computer Description,

97.

NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Vectra VL8

Card State

Interrupt

I/O Address

C800-h

into a PCI slot.

automatically be recognized. Click on "Next."

letter assigned to your CD-ROM) and click "OK."

(If you have an HP preloaded HDD, set the path to "C:\MASTERS\LAN

\TRPCI.WOL\WIN95\")

"Finish."

and click on "Close."

Vectra VE7/VE8

Enabled

DC00-h

3 Connecting to a Windows NT Server 3.51

Windows 95 SR2