HP Vectra VE6 8 Installation Manual page 15

Windows NT Requirements
Workstation
• HP Vectra with Windows NT Workstation 3.51 installed.
Version3.51
• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2
• Driver Name for VL8: IBMTRP.SYS Size: 89K Date: 5/21/96
• Driver Name for VE7/VE8: OEMSETUP.INF Size: 65K Date: 08/05/97
• Microsoft Windows NT 3.51 Server that supports Net BEUI, NWLink IPX/
Device Configuration
Card State
I/O Address
Procedure
1 With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card
2 Power on the machine and boot to Windows NT 3.51.
3 After Windows loads, open the "MAIN" program group , and double-click
4 Select the "Network" icon in the "Control Panel" program group.
5 Click on "YES" in the "Network Settings" dialog box, and NT Networking
6 Insert the Windows NT Workstation CD.
7 In the "Windows NT Setup" enter the path to your NT files, and click on
8 Click on the "Do Not Detect" button from the "Network Adapter Card
9 From the "Drop Down List", scroll down and select "<Other> Requires
SPX, and NWLink NetBIOS transfer protocols.
VL8
-
Interrupt 11
C800-h
into a PCI slot.
on "Control Panel" Icon.
will be installed on your computer.
the "Continue" button.
(If you have an HP preloaded HDD, set path to "C:\I386")
Detection" dialog box, and click on "Continue" in the second "Network
Adapter Card Detection" dialog box.
3 Connecting to a Windows NT Server 3.51
Windows NT Workstation Version3.51
VE7/VE8
Enabled
10
DC00-h