Installing A 5.25-Inch Disk Drive In The Bottom Shelf - HP Vectra VE5 2 User Manual

13 Install any other accessories before replacing the cover. Replace the side bezel.
Reconnect all cables and power cords.

INSTALLING A 5.25-INCH DISK DRIVE IN THE BOTTOM SHELF

A slim (1-inch high) 5.25-inch front access drive can be installed in the bottom shelf.
NOTE
1 Disconnect the computer's power supply cord from the power outlet. Disconnect any
connection to a telecommunications network.
2 Remove the computer's cover.
3 If there is a device in the middle shelf, remove it.
4 If there is no device in the middle shelf, remove the bezel. The bezel snaps in and out,
and can be removed without any tools.
Disk drives ordered from HP are supplied with
mounting rails. If you order your drive from another
supplier, you will need to order drive mounting rails
from HP (refer to "Supported HP Accessories", in
chapter 1.