HP Vectra VE5 2 User Manual page 30

Hp vectra ve5 2: users guide

Hide thumbs Also See for Vectra VE5 2:

Table of Contents

Secure the board by replacing the slot cover screw. If you loosened the screws on

adjacent slots, tighten them.

If you install a VESA-standard video adapter board which uses the integrated video

graphics controller, connect the accessory board's cable to the VESA pass-through

connector on the system board.

Install any other accessories before replacing the power supply and the cover. Reconnect

all cables and power cords.

Table of Contents

Vectra ve 5/xxx - 2 Vectra ve 5/xx series