HP Vectra VE5 2 User Manual page 56

PC I Devices
Slot #1 Bus Master
Slot #2 Bus Master
Slot #3 Bus Master
PCI IRQ line 1
PCI IRQ line 2
PCI IRQ line 3
PCI IRQ line 4
Setup Item
Security
Administrator Password is
Set Administrator
Password*
Password on boot
Start with keyboard locked
Boot on flexible disk drive
Write on flexible disk
drives
Use of flexible disk drive
Boot on hard disk drive
Fixed disk boot sector
Boot on CD-ROM
Space-bar POWER-ON
Enabled Enable this option if you need the BIOS to set
the PCI Bus Master bit. This could be necessary
Enabled
for some old PCI cards.
Enabled
Auto Select an IRQ number only if necessary (for
example for SCO-UNIX).
Auto
Auto
Auto
Default* Action
Disabled Indicates whether administrator password is
enabled.
Allows you to set the administrator password.
This password prevents unauthorized access to
the PC's configuration and can also be used to
start the PC.
Enabled Enable or disable password prompt on boot.
Disabled This feature allows the PC to start automatically,
without waiting for a password to be typed in,
but the keyboard will be locked. Only the user
password can unlock the keyboard. This option
is only displayed if a user password has been
set and is not available if you are running
Windows 95. When the PC is started with the
keyboard locked, the Caps Lock LED flickers
until the keyboard is unlocked.
Enabled Enables or disables boot on flexible disk drive.
Enabled Enables or disables writes on flexible disk drives.
Disabling prevents data being copied in your
absence.
User Limits the use of flexible disk drive(s) to the user
or the administrator, depending on the boot
password. Password on boot must be enabled
for this option to be set.
Enabled Enables or disables boot on hard disk drive.
Not protected Write-protects boot sector on hard disk to
protect against viruses.
Enabled Enables or disables boot on CD-ROM.
Enabled Enables or disables the space-bar to power-on
the PC.