Wake-On-Lan Support (Wol) - HP rp5000 Network Manual

Network Communications

Wake-On-LAN Support (WOL)

✎
1–4
Wake-On-Lan (WOL) can be enabled and disabled in Windows XP
and Windows 2000.
To enable or disable Wake-On-Lan:
Windows XP
1. Select Start > Control Panel.
2. Double-click Network Connections.
3. Double-click Local Area Connection.
4. Click Properties.
5. Click Configure.
6. Click the Power Management tab, then select or clear the check
box to Allow this device to bring the computer out of standby.
Windows 2000
1. Select Start > Settings > Control Panel.
2. Double-click Network and Dial-up Connections.
3. Right-click Local Area Connection.
4. Click Properties.
5. Click Configure.
6. Click the Power Management tab, then select or clear the check
box to Allow this device to bring the computer out of standby.
For more information on Wake-On-LAN, refer to the Remote
Management Administrators Guide. The Remote Management
Administrators Guide is included with the Remote Management
Setup Utilities and is available on the Support Software CD or at
www.hp.com.
www.hp.com Network & Internet Communications Guide