Required Equipment; Table 1-2 Required Equipment - NEC NEAX2000 IVS2 Manual

CHAPTER 1 GENERAL INFORMATION

Required Equipment

REQUIRED EQUIPMENT
Table 1-2 shows the required equipment for providing the Remote PIM System.
EQUIPMENT FUNCTIONAL
NAME
PN-DAIA DAI
PN-DAIB DAI
PN-DAIC DAI
PN-DAID DAI
PN-DAIE DAI
PN-DAIF DAI
Page 8
Table 1-2 Required Equipmen t
NAME
T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Card for
Remote PIM
Accommodates 24-channel PCM digital lines, and provides
Firmware Processor and BUS interface
One through three cards must be provided at the Main Site,
which corresponds to the number of the Remote Site.
T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Card for
Remote PIM
Accommodates 24-channel PCM digital lines, and provides
Firmware Processor
One card is required per Remote PIM at the Remote Site.
T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Channel
Expansion Card
Accommodates 24-channel PCM digital lines
One through six cards can be provided at the Main Site.
Two cards can be provided at the Remote Site.
E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines and provides
Firmware Processor and BUS interface
One though three cards must be provided at the Main Site,
which corresponds to the number of the Remote Site.
E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines and provides
Firmware Processor
One card is required per Remote PIM at the Remote Site.
E1 Digital Trunk Interface (2 Mbps) Channel Expansion Card
Accommodates 30-channel PCM digital lines
One through three cards can be provided at the Main Site.
One card can be provided at the Remote Site.
FUNCTION
2
NEAX2000 IVS Remote PIM System Manual
ND-70917 (E), Issue 1.0