Required Equipment - NEC NEAX2000 IPS System Manual

CÔNG TY VIỄN THÔNG VIỆT PRO

REQUIRED EQUIPMENT

This table shows the required equipment.
EQUIPMENT
PN-CP24-A/
PN-CP24-B (MP)
PN-CP27-A (MP)
PZ-M606-A (ETHER)
• 10BASE-T Cable
(TIA/EIA category 3 or
larger)*
• 100BASE-TX Cable
(TIA/EIA category 5)*
Router*
HUB*
IPW-2U UNIT**/
IPW-2UA UNIT**
IP-R UNIT**/
IP-RA UNIT**
*: Should be provided by customer.
**: AC-DC Adapter or inline power patch panel must be provided.
Chuyên phân phối tổng đài NEC
Required Equipment
DESCRIPTION
MP Card
MP Card for Backup CPU
System
Ethernet Control Card
10BASE-T/100BASE-TX
Cable between Ether Card
and Ethernet, IP-PAD Card
and Ethernet, IPT Card and
Ethernet
NOTE: Cisco Router is
recommended.
NOTE:
Switching HUB is
required for
ETHER and IP-
PAD.
term
IP Adapter for D 75
term
IP Adapter for D 85
(Series i)
– 55 –
CHAPTER 2 INSTALLATION
QUANTITY
1 One card per system
Mount on PIM0
2 Two cards per system
Mount on PIM0
1 Mount on PN-CP24-A/
CP24-B card
One card per MP
2 Mount on PN-CP27-A card
One card per MP
As required Cable length:
Maximum 100m (328 ft.)
For IP-PAD, 100BASE-TX
is recommended.
As required
As required
1-956 One per D
1-956 One per D
http://vietpro.com.vn
REQUIRED EQUIPMENT
REMARKS
term
75
term
85 (Series i)
Continued on next page
ND-71503(E) Rev.5.0
9pch2001.fm
SEPTEMBER/15/2004