Table of Contents
Advertisement
Important Safety Information
Electric shock hazard:
• This unit is intended for use only within measurement
category O and for measurements performed on circuits
not directly connected to AC mains power.
• Do not trace live AC mains power circuits.
• This tool is not intended as a replacement for a multimeter,
test-lamp, or specially engineered AC mains power detec-
tor. This tool has conductive tips which may cause a short
circuit resulting in a dangerous arc flash.
• This unit does not detect potentially hazardous direct
current (DC) or alternating current (AC) with frequencies
beyond 50 or 60 Hz. Always use a suitably rated multime-
ter or test-lamp to check by direct connection that a circuit
is safe to touch.
Failure to observe these warnings could result in severe
injury or death.
500XP • 500FP
5
Advertisement
Table of Contents
