Fisher-Price Barbie Free Spirit Trike 72639 Instructions Manual page 6

72639b-0920.qrk 12/6/00 9:26 AM Page 6
13
Handlebar
#8 x 3" Screw – 1
SHOWN ACTUAL SIZE
• Turn the frame upright.
• Insert the fork post up through the hole in the neck of the
frame. Make sure the fork is positioned so that the fork
covers face the rear wheels.
• Place the handlebar over the fork post and push it down
onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.
Hint: You may need to rotate the handlebar to align the holes.
• Insert the #8 x 3" screw through the hole in the handlebar
and into the fork post. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
Assembly
Assembly
Frame Neck
Fork Post
Fork Cover
Rear of Trike
14
Seat
Pegs
Holes
• At an angle, insert one peg on the back of the seat into the
hole in the top rear of the frame.
• Insert and "snap" the other peg on the back of the seat
into the other hole in the top rear of the frame.
One-time assembly is now complete.
6