Fisher-Price Barbie Free Spirit Trike 72639 Instructions Manual page 4

72639b-0920.qrk 12/6/00 9:26 AM Page 4
4
Indented
Side Up
Washer
Straight Axle
Frame
Assembled Rear
Wheel
Bottom View
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the assembled rear wheel on the scrap block of wood.
• Slide a washer onto the straight axle.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Fit a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear wheel
up to be sure the cap nut is securely attached to the
straight axle.
• Set the frame assembly aside.
Assembly
Assembly
5
Pedal Axle
Cap Nut
Hubcap
Rear Wheel
Slot
• Fit two pedal hubs onto the pedal axle tabs. Make sure the
tabs fit into the slot in each pedal hub.
6
Pedal Axle
Scrap Block
of Wood
• While holding the pedal hubs on the pedal axle, insert the
pedal axle through the hole in the center of the front wheel.
7
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
4
Pedal Hub
Tab
Tab
Pedal Hub
Pedal Hubs
Hole
Front Wheel
Pedal Hubs