Led Indicator Table - Synology RX6022sas Hardware Installation Manual

LED Indicator Table

LED Indicator
POWER
Drive Status Indicator
(on tray)
ALERT
PSU Indicator
Rear Status
Rear Alert
SAS IN/OUT
Note:
1 Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's
diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in
S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical
Support for help.
2 If the ALERT LED continuously blinks orange, this indicates there are system errors such as fan failure,
system overheating, or volume degrade. Please sign in to DSM for detailed information.
6 Chapter 1: Before You Start
Color Status
Blue Static
Off
Static
Blue
Blinking
Red Static
Off
Orange Blinking
Off
Static
Green
Blinking
Orange Static
Off
Green Static
Off
Orange Blinking
Off
Green Static
Off
Description
Powered on
Powered off
Drive ready and idle
Accessing drive
Drive error/Port disabled
No internal Drive
2
System error
System normal
Power supply unit normal
Power standby/AC present
Power supply unit fail/No AC power
Power supply unit off
Powered on
Powered off
System error 2
System normal
Synology NAS/Expansion unit
connected
Synology NAS/Expansion unit
disconnected
1