Led Indicator Table - Synology NAS SA3200D Hardware Installation Manual

LED Indicator Table

Location LED Indicator
Power
HA STATUS
Front Panel
ALERT
Drive Status
Indicator
(on tray)
1
If one controller is powered on while the other is booting up, the ALERT indicator will display the controller's status that is powered on.
2
If the system contains only one controller, the ALERT indicator will only display that controller's status.
3
Please try to restart your Synology NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of
the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology
Technical Support for help.
21 Chapter 2: Hardware Setup
Color Status
Static
Blue
Blinking
Off
Green Static
Orange Blinking
Off
Orange Blinking
1 2
Off
Static
Green
Blinking
Red Static
Off
Description
Powered on
Booting up / Shutting down on one of the controller
Both controllers are booting up / shutting down
Powered off
Both controllers are powered on and HA (High
Availability) status is normal
Both controller modules are installed and powered on,
but HA (High Availability) status is abnormal
Both controller modules are installed, one of the
controller is powered on while the other is booting up
Only one controller module is installed and powered on
Both controllers are booting up
Only one controller module is installed and booting up
Fan failure / Over temperature on one controller while
the other is normal
Fan failure / Over temperature on both conrollers
System normal
Both controllers are booting up
Drive ready and idle
Accessing drive
Drive error / Port disabled
No internal drive
3