Advertisement
1
1. Select "Gyro setting" on the last page of
Airplane Model Menu
2
2. Select "Start"
3
3. Home screen is displayed
◆ When copying data from Gyro A to Gyro B
Connect the gyro A to the T16IZ and press [Start]. (Enter the data of A into T16IZ)
If you press Start here, the B data will be download to the
T16IZ and the A data will be lost.
Connect Gyro B to T16IZ and press [GY Settings Transfer]. (Put data on A into gyro B)
When "GY Settings Transfer" is
selected, the gyro setting data saved
in T16IZ is written to the gyro.
To Basic menu
SETTING
* At this time, if Gyro is not connected to
T16IZ by wire, this screen appears.
Tap "Yes" to display the GYA553 data saved
in T16IZ.
Select "Start"
This will download the gyro data to
the T16IZ.
3
Advertisement
