FUTABA T16IZ Setting Manual page 10

Set the CH for each function according to the transmitter to be used. Any unused functions should be set
to INH (Inhibited).
The channel of each function can be changed.
Tap to move to the rate
switching CH setting page.
ON-OFF channel for auto
recovery
! 10 CH ON
SBUS Basic menu SBUS Basic menu
Holding Power C2 to C5
WARNING
Always verify that the S.BUS function assignments
match your transmitterʼ s function (in the FUNCTION
menu) assignments. If any changes are made within
the transmitter function assignments, then it will also
be necessary to make the changes within the S.BUS
function assignments. To change the channel, GYA553
and T16IZ must be connected.
Tap the CH used for rate switching
to select it.
Reset each S.BUS function. It
returns to the initial value.
10