Table of Contents
Advertisement
1
2
1
Insert the white valve into the pump body from underneath.
Push in the valve as far as possible.
2
Screw the pump body clockwise onto the container until it is
securely fixed.
3
Place the silicone diaphragm into the pump body from above.
Make sure it fits securely around the rim by pressing down
with your fingers to ensure a perfect seal.
4
Place the massage cushion into the funnel-shaped section of
the pump body. Push in the inner part of the massage cushion
as far as possible and make sure that it is perfectly sealed all
around the rim of the pump body. Press in between the petals
to remove any trapped air.
Note: Place the cover over the massage cushion to keep the breast
pump clean while you prepare for expressing.
5
Insert the adapter into the wall socket and insert the other
end into the motor unit.
The adapter reference code is indicated on the bottom of the
appliance. Only use the indicated adapter with the appliance.
ENGLISH
9
Advertisement
Table of Contents
