1
Unscrew the container and remove it from the pump body.
2
Assemble a sterilised teat and screw ring onto the container.
Seal the teat with the dome cap.
3
Alternatively, insert a sterilised sealing disc into a sterilised
screw ring and screw this onto the container.
Do's
-
Always refrigerate or freeze expressed milk immediately.
-
Only store milk collected with a sterilised breast pump in
sterilised containers.
Don'ts
-
Never refreeze thawed breast milk.
-
Never add fresh breast milk to frozen breast milk.
Feeding your baby expressed breast milk
You can feed your baby with breast milk from Philips Avent bottles
and storage cups:
1
If you use frozen breast milk, let it defrost completely before you
heat it.
Note: In case of an emergency, you can defrost the milk in a bowl of hot
water.
2
Heat the bottle or storage cup with defrosted or refrigerated
breast milk in a bowl of hot water or in a bottle warmer.
3
Remove the screw ring and sealing disc from the container or
remove the lid from the storage cup.
4
If you are using a storage cup, screw the adapter ring onto the cup.
5
Screw a sterilised screw ring with sterilised teat onto the
container or onto the storage cup with adapter ring.
Do's
-
Always check the temperature of the milk before you feed it to
your baby.
-
Always discard any breast milk that is left over at the end of a feed.
Don'ts
-
Never heat breast milk in a microwave, as this can cause uneven
heating, which can lead to hot spots in the milk. It may also
destroy nutrients in the milk.
ENGLISH
13