Table of Contents
Advertisement
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3. Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
Unpairing the watch from a phone requires
both CASIO WATCHES and watch
operations.
Watch Operation Guide 5665
Deleting Pairing Information from
●
CASIO WATCHES
1. X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2. Y
Tap the "CASIO WATCHES" icon.
3. Y
Perform the operation shown on the
phone screen to unpair.
Deleting Pairing Information from the
●
Watch
1. X
Pull out the crown to the first click.
2. X
Hold down (B) for at least 10 seconds.
This deletes the pairing information. The
second hand will point to [C].
3. X
Push the crown back in.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
Deleting Pairing Information from the
l
Watch
Pair the watch with a phone.
l
C
Disconnected
30
30
Time Adjustment
Your watch can obtain date and time
information by connecting with a phone and by
receiving time signals, which it uses to adjust
its settings.
Important!
Disable auto time adjustment
●
whenever you are inside an aircraft or
in any other area where radio wave
reception is prohibited or restricted.
Using the Watch in a Medical
l
Facility or Aircraft
15
Advertisement
Table of Contents
