Table of Contents
Advertisement
Watch Operation Guide 5665
Q2
The signal receive operation always
fails.
Is the watch in a location that is appropriate
for signal reception?
Check your surroundings and move the
watch to a location where signal reception
is better.
Appropriate Signal Reception Location
l
Did you avoid touching the watch while the
receive operation was in progress?
Minimize movement of the watch and do
not perform any watch operation while a
receive operation is in progress.
Is the signal transmitter in your area
transmitting a signal?
The transmitter of the time calibration may
not be transmitting a signal.
Try again later.
Q3
Signal reception should have been
successful, but the watch's time and/
or day is wrong.
Is the time zone where you are using the
watch specified correctly?
Specify the time zone where you are using
the watch.
Setting a Home City
l
World Time City Setting
l
Is the hand and/or day indicator alignment
correct?
Adjust hand and/or day indicator
alignment.
Adjusting Hand and Day Indicator
l
Alignment
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.
Using Watch Operations to Adjust the
l
Time Setting
I can't pair the watch with a
phone.
Q1
I've never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install CASIO WATCHES on your
phone?
CASIO WATCHES needs to be installed
on your phone in order to connect with the
watch.
Install the required app on your
l
A
phone.
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
"Settings"
"Bluetooth"
n
n
●
"Settings"
"Privacy"
n
n
●
Sharing"
"CASIO WATCHES"
n
Android Users
Enable Bluetooth.
●
Other than the above.
Some phones need to have BT Smart
disabled to use CASIO WATCHES. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: "Menu"
"Settings"
"Bluetooth"
n
n
"BT Smart settings"
"Disable".
n
I can't reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is CASIO WATCHES running?
The watch cannot re-connect with the
phone unless CASIO WATCHES is
running on the phone. On the phone's
Home Screen, tap the "CASIO
WATCHES" icon. Then on the watch, hold
down (B) until the second hand points to
[C] twice.
The second hand will point to [C] once
●
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the "CASIO WATCHES" icon.
Next, on the watch, hold down (B) until the
second hand points to [C] twice.
On
The second hand will point to [C] once
●
"Bluetooth
after about 0.5 seconds, and then a
On
n
second time after about 2.5 seconds.
Q2
I can't connect while my phone is in
n
the Airplane Mode.
"Menu"
n
Connection with the watch is not possible
while the phone is in the Airplane Mode. After
exiting the phone's Airplane Mode, go to the
phone's Home Screen and tap the "CASIO
WATCHES" icon. Then on the watch, hold
down (B) until the second hand points to [C]
twice.
The second hand will point to [C] once after
●
about 0.5 seconds, and then a second time
after about 2.5 seconds.
30
30
30
26
Advertisement
Table of Contents
