Stopwatch; Measuring Elapsed Time - Casio 5665 Operation Manual

After Arriving
●
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping After swapping
Destination time
30
Destination time
Using CASIO WATCHES to Configure
l
Settings
Using Watch Operations to Configure
l
Settings
2.
Enable auto time adjustment.
Using CASIO WATCHES to Configure
l
Settings
Using Watch Operations to Configure
l
Settings
3.
Adjust the time setting.
Triggering Immediate Time Adjustment
l
Watch Operation Guide 5665
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
30

Measuring Elapsed Time

Minutes
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Push the crown back in.
3.
Use the operations below to measure
elapsed time.
4.
Press (B) to reset the elapsed time to all
zeros.
Pulling out the crown while an elapsed
●
time measurement operation is in
progress will reset the displayed value
to all zeros.

Stopwatch

Hours Seconds
30
Hours (24-hour time)
Start
Stop
Resume
Stop
Note
The (B) button operations below can
●
be performed while an elapsed time
measurement operation is in progress.
Connecting with a Paired Phone to
ー
Adjust the Watch's Time
Time Adjustment Using a Time
ー
Calibration Signal
Pairing or Re-pairing the Watch with
ー
a Phone
Searching for a Paired Phone
ー
Resetting the stopwatch to all zeros
●
causes the second hand to move
momentarily to 12 o'clock. After 10
seconds, it will start indicating the
current timekeeping seconds.
The mode hand points to [ST] while an
●
elapsed time measurement operation
is in progress. The mode hand points
to the Home City day of the week while
the stopwatch is reset to all zeros.
22