Auto Time Adjustment - Casio 5665 Operation Manual

Pair the watch with a phone.
●
C
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2. Y
Tap the "CASIO WATCHES" icon.
Tap on the "My Watch" tab. Next,
●
select the applicable product name.
3. X
Hold down (B) for at least 2.5 seconds
until the second hand moves to [C].
4. Y
Perform the operation shown on the
screen of the phone to be paired with.
When a connection between the watch
and phone is established, the second
hand moves to [C].
If pairing fails for some reason, the
●
watch will return to the state in step 1 of
this procedure. Perform the pairing
procedure again from the beginning.
Note
The first time you start up CASIO
●
WATCHES, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Watch Operation Guide 5665

Auto Time Adjustment

The watch will connect with a phone at preset
times each day and adjust its time settings.
Using This Function
●
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave the watch in the World Time Mode or in
the Stopwatch Mode while it is reset to all
zeros, it will perform the time adjustment
operation automatically as you go about your
daily life, without any operation required by
you.
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
While CASIO WATCHES is not
ー
running on the phone
Note
If the watch does not indicate the
●
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
Adjusting Hand and Day Indicator
l
Alignment
If there is a World Time City specified
●
with CASIO WATCHES, its time will
also be adjusted automatically.
The watch will connect with the phone
●
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (B) for at least 0.5 seconds
until the second hand points to [C].
Release the button as soon as the second
hand points to [C].
When the watch connects with a phone,
the second hand will normally move to
[Y(YES)] and then the watch's time setting
will be adjusted.
The connection is terminated
●
automatically after time adjustment is
complete.
Connected
adjustment
30
After time
30
11