Checking The Last Time Adjustment Result; Using The Watch In A Medical Facility Or Aircraft - Casio 5702 Operation Manual

Configuring the Summer Time Setting
●
(Home City)
The watch's current time setting can be
changed to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Important!
If the Home City time zone is an area
●
where time calibration signal reception
is possible, you can select [AT] (Auto)
for the summer time setting. While [AT]
is specified as the summer time
setting, the first time calibration signal
receive operation after the Home City
enters the summer time period will
cause the watch's time setting to
switch to summer time. The first time
calibration signal receive operation
after the end of the summer time period
is reached will cause the watch's time
setting to switch to standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
City (Time Zone) List
l
1.
Loosen the crown and then pull it out to the
second click.
The second hand will point to the currently
selected time zone.
The mode hand will point to the summer
●
time setting for the currently selected
Home City.
Time zone
Summer time setting
Watch Operation Guide 5702
2.
Hold down (B) for at least one second.
Each time you hold down (B) for at least
one second, the summer time setting will
cycle to the next available option.
3.
Push the crown back in and then lock it.
Checking the Last Time
Adjustment Result
1.
Enter the Calendar Mode.
Navigating Between Modes
l
2.
Press (D).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
Note
Even if there was a successful time
●
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
Crown
adjusted the time and/or date setting
manually.
The time calibration signal receive
●
result will not be indicated after the
watch is paired with a phone.
Second hand
Using the Watch in a Medical
Facility or Aircraft
When you are in a hospital, on an aircraft, or
in any other location where auto time signal
reception or connection with a phone may
cause problems, enable the watch's Airplane
Mode. To disable the watch's Airplane Mode,
perform the same operation again.
1.
Enter the Calendar Mode.
Navigating Between Modes
l
2.
Press (D).
The second hand will indicate the last
receive result for nine or ten seconds.
3.
Within 10 seconds after you perform the
operation in step 2, loosen the crown and
then pull it out to the first click.
If more than 10 seconds elapse before
●
you pull out the crown after you perform
the operation in step 2, the second hand
will return to indicating seconds. If this
happens, perform step 2 again.
4.
Rotate the crown to enable the Airplane
Mode.
[Y(YES)]: Airplane Mode disabled (Auto
time adjustment enabled)
[N(NO)]: Airplane Mode enabled (Auto
time adjustment disabled)
5.
Push the crown back in and then lock it.
Crown
19