Linking With A Phone; Getting Ready; Auto Time Adjustment - Casio 5702 Operation Manual

Linking with a Phone

While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch's current time setting is adjusted
automatically. You can also change the
watch's other settings.
Note
This function is available only while
●
CASIO WATCHES is running on the
phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y

Getting Ready

To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the required app on your
●
A
phone.
In Google Play or the App Store, search for the
"CASIO WATCHES" phone app and install it
on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
Pair the watch with a phone.
●
C
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2. Y
Tap the "CASIO WATCHES" icon.
Tap on the "My Watch" tab. Next,
●
select the applicable product name.
3. X
Hold down (D) for at least 2.5 seconds
until the second hand points to [C].
Watch Operation Guide 5702
4. Y
Perform the operation shown on the
screen of the phone to be paired with.
When a connection is established
●
between the watch and phone, the
second hand moves to [C].
If pairing fails, the watch returns to the
●
state it was in before starting this
procedure. Perform the pairing
procedure again from the beginning.
Note
The first time you start up CASIO
●
WATCHES phone app, a message will
appear on your phone asking if you
want to enable location information
acquisition. Configure settings to allow
background use of location
information.

Auto Time Adjustment

Your watch can connect with your phone to
adjust the watch's time setting.
If you leave the watch in the Calendar Mode,
it will perform the adjustment operation
automatically as you go about your daily life
(as shown in the illustration), without any
operation required by you.
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
While the CASIO WATCHES phone
ー
app is not running on the phone
While the watch is in a power saving
ー
state following approximately one
hour of non-use
11