Si001362E
7. Outer Panels / Outdoor Fan / Fan Motor
Warning
Step
1. Remove the shield plate
and the front panel.
1
Release the humidifier
unit relay harness from
the fixing point on the
shield plate.
2
Lift and remove the
shield plate.
3
Remove the 6 screws
of the front panel.
4
Unfasten the 5 hooks
and remove the front
panel.
2. Remove the discharge
grille (lower).
1
Remove the 4 screws
and slide the discharge
grille (lower) upward.
2
Unfasten the 6 hooks
and remove the
discharge grille.
Removal Procedure
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work
Procedure
Front panel
Hook
Hook
Hook
Outer Panels / Outdoor Fan / Fan Motor
Shield plate
(R19593)
(R19594)
Hook
Discharge grille
(lower)
Hook
(R19595)
Points
When reassembling, make
sure to fit the 5 hooks.
11