Heater Assembly
2. Heater Assembly
Warning
Step
1. Inner structure of the
humidifier unit
2. Remove the heater
assembly.
1
Release the harnesses
from the hook.
2
Remove the 3 screws
and remove the duct
(adsorption side).
3
Release the harnesses
from the 3 hooks.
4
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Hygroscopic fan
motor harness
Hook
Heater
assembly
Humidifier
fan motor
Duct
(adsorption side)
Humidifying
rotor motor
Damper
motor
Humidifying
thermistor
(R19571)
Duct
(adsorption side)
Hook
(R19572)
Hook (a)
Hook (c) Hook (b)
(R19573)
Si001362E
Points
When reassembling, these
harnesses must be fit in the
following hooks.
• Humidifying rotor motor
• Damper motor
• Limit switch
• Humidifying thermistor
→
Hook (a) and hook (b)
• Hygroscopic fan motor
→
Hook (b) and hook (c)
• Heater
→
Hook (c) only
Removal Procedure