Using Hp Maxilife To Diagnose Problems - HP Kayak XA05 User Manual

ashaki.bk : ashak-3.fb4 Page 28 Wednesday, July 15, 1998 6:13 PM
Pre-Boot Checks
3 Troubleshooting Your HP PC Workstation

Using HP MaxiLife to Diagnose Problems

Using HP MaxiLife to Diagnose Problems
Your HP LCD can help you to diagnose problems with your PC
Workstation, even when you are unable to get your system and monitor
working properly.
When you press your PC Workstation's on/off button, HP MaxiLife will
check your system before it initiates the start-up sequence. You will see
one of the following screens on the LCD as these checks progress:
Error!
CPU Socket
Check that processor is correctly Check power supply and
inserted in CPU slot. power cable connections.
Error!
No RAM
Check memory installation
Check that power supply is
properly connected.
Error!
BIOS
Flash new BIOS or start Check that graphics card
system using crisis switch
is installed correctly.
(system board switch 10).
No errors occurred during pre-
boot. POST is initiated.
28 English
Error!
Power supply
Check processor installation.
Error!
Power
Check system board.
Error!
No Video
Check that RAM types
installed are compatible.
HP KAYAK XA
Error!
Power CPU
Error!
Board PLL
Error!
RAM type