Pre-Boot Checks
Note: Some error
messages displayed here
may not be available.
HP Kayak XU 03xx PC Workstation Troubleshooting Your HP PC Workstation
Using HP MaxiLife to Diagnose Problems
Using HP MaxiLife to Diagnose Problems
Your HP LCD can help you to diagnose problems with your PC
Workstation, even when you are unable to get your system and monitor
working properly.
When you press your PC Workstation's on/off button, HP MaxiLife will
check your system before it initiates the start-up sequence. You will see
one of the following screens on the LCD as these checks progress:
Error!
CPU Socket
Check that a CPU or terminator
is installed in the CPU slots
Error!
Power CPU 2
Check processor 2 VRM
installation.
Error!
No RAM
Check memory installation.
HP KAYAK XU
No errors occurred during pre-
boot. POST is initiated.
2
English
Error!
Power supply
Check power supply and
power cable connections.
Error!
Board PLL
Check system board.
Error!
No Video
Check that graphics card
is installed correctly.
Error!
Power CPU 1
Check processor 1 VRM
installation.
Error!
BIOS
Flash new BIOS.
Error!
RAM type
Check that installed RAM
types are compatible.