Standby Time Out; Suspend Time Out; Throttle Slow Clock Ratio - MSI MS-6114 Manual

Table of Contents

CHAPTER 3

Standby Time Out

This option specifies the length of a period of system inactivity

while in Full power on state. When this length of time expires, the computer

enters Standby power state. The settings are Disabled, 1 min, 2 min, 3 min, 4

min, 5 min, 6 min, 7 min, 8 min, 9 min, 10 min, 11 min, 12 min, 13 min, 14 min or

15 min. The Optimal and Fail-Safe default settings are Disabled.

This option specifies the length of a period of system inactivity

while in Standby state. When this length of time expires, the computer

enters Suspend power state. The settings are Disabled, 1 min, 2 min, 3 min, 4

min, 5 min, 6 min, 7 min, 8 min, 9 min, 10 min, 11 min, 12 min, 13 min, 14 min or

15 min. The Optimal and Fail-Safe default settings are Disabled.

This option specifies the speed at which the system clock runs in

power saving states. The settings are expressed as a ratio between the

normal CPU clock speed and the CPU clock speed when the computer is in

the power-conserving state.

Modem Use IO Port

This indicates which IO port will be used by the Modem(if there is a

Modem).

Modem Use IRQ

This indicates which IRQ no. will be used by the Modem(if there is

a Modem).

Display Activity/Device 6/Device 7/Device 8/Device 5/Device

0/Device 1/Device 1/Device 2/Device 3/System Thermal

When set to Monitor, these options enable event monitoring on the

specified hardware interrupt request line. If set to Monitor and the computer

is in a power saving state, AMI

IRQ line. The computer enters the full on power state if any activity occurs.

AMI

BIOS reloads the Standby and Suspend timeout timers if

activity occurs on the specified IRQ line.

AMI

BIOS watches for activity on the specified

3-17

BIOS USER'S GUIDE

Table of Contents